Oil Seal - Subaru 2002 IMPREZA Service Manual

Hide thumbs Also See for 2002 IMPREZA:
Table of Contents

Advertisement

MANUAL TRANSMISSION AND DIFFERENTIAL

5. Oil Seal

A: INSPECTION
Check the oil seal portion for leakage. If leakage is
found, replace the oil seal with a new one.
B: REPLACEMENT
1) Clean the transmission exterior.
2) Drain the gear oil completely.
NOTE:
Tighten the drain plug after draining gear oil.
Tightening torque:
44 N·m (4.5 kgf-m, 32.5 ft-lb)
3) Remove the rear exhaust pipe and muffler.
4) Remove the heat shield cover. (If equipped)
5) Remove the propeller shaft. <Ref. to DS-15, RE-
MOVAL, Propeller Shaft.>
6) Using the ST, remove the oil seal.
ST 398527700
PULLER ASSY
(A) Oil seal
OIL SEAL
7) Using the ST, install the oil seal.
ST 498057300
8) Install the propeller shaft. <Ref. to DS-16, IN-
STALLATION, Propeller Shaft.>
9) Install the heat shield cover.
10) Install the rear exhaust pipe and muffler.
11) Pour gear oil and check the oil level. <Ref. to
MT-32, REPLACEMENT, Transmission Gear Oil.>
B3M0037
B3M2135A
MT-42
INSTALLER
B3M1982

Advertisement

Table of Contents
loading

This manual is also suitable for:

2001 impreza

Table of Contents