MANUAL TRANSMISSION AND DIFFERENTIAL
25) Remove the spring pins and separate the front
drive shafts from each side of transmission.
NOTE:
Discard the removing spring pin. Replace with a
new one.
26) Remove the nuts which hold lower side of
transmission to engine.
27) Place the transmission jack under transmis-
sion.
CAUTION:
Always support the transmission case with a
transmission jack.
MANUAL TRANSMISSION ASSEMBLY
G2M0325
B2M2790
G2M0326
MT-36
28) Remove the transmission rear crossmember
from vehicle.
29) Remove the transmission.
NOTE:
Move the transmission jack toward rear until main
shaft is withdrawn from clutch cover.
30) Separate the transmission assembly and rear
cushion rubber.
G2M0831