SHIFT SOLENOIDS, DUTY SOLENOIDS AND ATF TEMPERATURE SENSOR
AUTOMATIC TRANSMISSION
8) Lower and remove the jack.
9) Connect the transmission harness connector.
10) Install the pitching stopper.
Tightening torque:
T1: 50 N·m (5.1 kgf-m, 37 ft-lb)
T2: 58 N·m (5.9 kgf-m, 43 ft-lb)
11) Install the air cleaner case. <Ref. to IN-6, IN-
STALLATION, Air Cleaner Case.>
12) Install the intercooler. (Turbo model)
<Ref. to IN(TURBO)-11, INSTALLATION, Inter-
cooler.>
13) Fill ATF up to the middle of the "COLD" side on
level gauge by using the gauge hole. <Ref. to AT-9,
Automatic Transmission Fluid.>
14) Check the ATF level. <Ref. to AT-9, Automatic
Transmission Fluid.>
S2M0212
H3M1839A
AT-44