Subaru 2002 IMPREZA Service Manual page 1881

6) Remove the spacer, bushing and pedal pad from
clutch pedal.
(A) Spacer
(B) Bushing
(C) Bushing
(D) Pedal pad
(E) Clutch pedal
(F) Bushing C
• 1.6 L MODEL
1) Remove the spring and bushing.
(B)
(A)
(A) Bushing
(B) Spring
2) Remove the clutch pedal.
CLUTCH PEDAL
B2M4229A
(A)
TR0946
TR0947
3) Remove the spacer, bushing, stopper and clutch
pedal pad.
(B)
(A) Spacer
(B) Bushing
(C) Stopper
(D) Clutch pedal pad
4) Remove the adjust bolt and stopper.
D: ASSEMBLY
1. LHD MODEL
1) Attach the stopper, etc. to pedal bracket tempo-
rarily.
2) Clean inside of bores of clutch pedal and brake
pedal, apply grease, and set bushings into bores.
3) Align bores of pedal bracket, clutch pedal and
brake pedal, attach the brake pedal return spring,
assist rods, spring, and bushing. (Except 1.6L mod-
el)
NOTE:
Clean up inside of bushings and apply grease be-
fore installing the spacer.
4) Align the bores of pedal bracket, clutch pedal
and brake pedal, then attach the brake pedal,
bushings, spring and clutch cable. (1.6L model)
5) Install the hill holder cable to clutch pedal. (Vehi-
cle with hill holder)
2. RHD MODEL
1) Clean and apply grease to the hole of sliding
portion between clutch pedal and bushing.
2) Install the pad, stopper, spacer and bushings to
clutch pedal.
NOTE:
Clean up inside of bushings and apply grease be-
fore installing the spacer.
3) Install the rod S, spring S, bushing S, O-ring,
clip, bushing, clutch switch and bushing C to clutch
pedal bracket. (Except 1.6L model)
4) Install the pedal assembly, stopper, adjust rod,
clutch cable, bushings and spring to clutch pedal
bracket.
CL-45
CLUTCH SYSTEM
(B)
(A)
(C)
(E)
(D)
TR0948