Front Frame - Epson Stylus CX4900 Service Manual

EPSON Stylus CX4900/CX4905/CX5000/DX5000/DX5050/CX5900/CX6000/DX6000/DX6050

4.4.22 Front Frame

External view
Front Frame
2
C.B.S. 3x6 F/Zn (7±1kgfcm)
Ribs
Figure 4-43. Removing Front Frame
DISASSEMBLY/ASSEMBLY
3
A D J U S T M E N T
R E Q U I R E D
1
Printer Section
Part/Unit that should be removed before removing Front Frame
Document Cover / Panel Unit / Scanner Unit / Housing, Upper / Housing, Lower /
Main Board Unit / CR Guide Frame / CR Motor / CR Scale / Carriage Unit
Removal procedure
1. Remove the screws (x3, ) that secure the Front Frame, and remove the
Front Frame from the Printer Mechanism.
Match the ribs (x3,
holes of the Front Frame.
Tighten the screws in the order as shown in the figure.
After replacing the Front Frame with a new one, always apply
grease KEN to the specified parts.
•
Refer to Figure 6-9 (p194)
After removing/replacing the Front Frame, perform the
adjustment referring to
(p172)
Revision A
) of the Main Frame with the positioning
for details.
Table 5-1."Required Adjustments"
158