Can-Am Outlander 400 EFI 2009 Operator's Manual page 91

Ensure vehicle is on a level surface.
On the right side of vehicle, remove en-
gine cover.
vmo2008-019-025_a
RH SIDE OF VEHICLE
1. Engine cover
Remove dipstick.
NOTICE
Pay attention not to lose
the O-ring on dipstick.
RH SIDE OF ENGINE
1. Dipstick
2. O-ring
Clean the oil drain plug area.
Place a drain pan under the oil drain
plug area.
Unscrew oil drain plug.
vmo2008-019-023_a
RH SIDE OF ENGINE
1. Oil drain plug
2. Gasket ring
Allow oil to drain completely from
crankcase.
Unscrew the oil filter cover.
vmo2008-019-024_a
1. Oil filter cover
Remove the oil filter screws, cover
with O-ring and oil filter.
_______________
MAINTENANCE PROCEDURES
89