Can-Am Outlander 400 EFI 2009 Operator's Manual page 103

Unplug connector from headlight.
NOTE: Use small locking tab to unlock
connector then pull on connector.
vmo2006-005-041_a
PUSH ON LOCKING TAB TO UNLOCK
CONNECTOR
NOTE: Concerning the following il-
lustrations, the front fascia has been
removed from the vehicle for a better
comprehension.
Press the spindle then push it on the
side to unlock headlight bulb.
TYPICAL
Lift and hold the spindle then remove
the bulb.
TYPICAL
Properly reinstall removed parts in the
reverse order of their removal.
Headlight Beam Aiming
Adjust beam aiming as follows:
Turn adjustment screws to adjust
beam height and side orientation to
your convenience. Adjust both head-
lights evenly.
vmo2008-019-039_a
1. Adjustment screws
Taillight Bulb Replacement
To have access to bulb, pull on taillight
to release it from its rubber grommets.
______________
MAINTENANCE PROCEDURES
101