Trailer Hitch; Tool Kit; Rewind Starter Handle; Winch - Can-Am Outlander 400 EFI 2009 Operator's Manual

CONTROLS/INSTRUMENTS/EQUIPMENT
WARNING
Ensure to properly secure material
to racks. Do not overload. Ensure
load does not interfere with visi-
bility and/or steering. Do not carry
passenger(s).
SPECIFICATIONS
Refer to
weight recommendations.

17) Trailer Hitch

Convenient hitch to install a ball to tow
a trailer or other equipment. Install
the proper ball size as per trailer man-
ufacturer recommendations. Refer to
SPECIFICATIONS
and towing recommendations.
1. Trailer hitch
WARNING
Ensure to install the proper ball
size that matches the equipment
you will tow.
NOTE: Follow manufacturer's instruc-
tions for proper attachment.
______________
70
for cargo
for carrying loads

18) Tool Kit

The tool kit is located in the rear stor-
age compartment.
It contains tools for basic maintenance,
this Operator's Guide and the
GUIDE TO WINCHING TECHNIQUES
with the XT models.

19) Rewind Starter Handle

The rewind starter handle is provided
as an emergency starting device.
Follow the usual starting procedure;
but use the rewind starter instead of
the electric starter.
To engage mechanism, pull handle
slowly until a resistance is felt then
continue to slowly pull the handle until
the compression stroke peak (strong
rotating resistance) is overpassed
then, pull vigorously. Slowly release
handle.
vmo2008-019-014_a
1. Rewind starter handle

20) Winch

XT Models
For proper winch operating instruc-
tions, refer to the
WINCHING TECHNIQUES
with the vehicle.
BASIC
BASIC GUIDE TO
included