Can-Am Outlander 400 EFI 2009 Operator's Manual page 106

MAINTENANCE PROCEDURES
Wheel Removal/Installation
Loosen nuts then lift vehicle.
Place a support under vehicle.
Remove nuts then remove wheel.
At installation, it is recommended to
apply anti-seize lubricant on threads.
Gently tighten nuts in a criss-cross se-
quence then apply final torque.
Torque Application
All Models Except XT
Torque to 70 N•m (52 lbf•ft).
NOTICE
Always use the recom-
mended wheel nuts (P/N 250 100
042). Using a different nut could
cause damages to the rim.
______________
104
TYPICAL — OPENED END TYPE
1. Taper side of nut
XT Models
Torque to 100 N•m (74 lbf•ft).
NOTICE
Always use the recom-
mended wheel nuts (P/N 250 100
082). Using a different nut could
cause damages to the rim.
vmo2008-001-002_a
TYPICAL — CLOSED END TYPE
1. Wheel nut