Drive Shaft Boot/Protector - Can-Am Outlander 400 EFI 2009 Operator's Manual

MAINTENANCE PROCEDURES
vmo2008-019-040_a
Turn and pull light socket to expose
bulb.
vmo2008-001-006
Push the bulb in and hold while turning
counterclockwise to release.
Install the new bulb by pushing it in
while turning clockwise.
Reinstall all removed parts.

Drive Shaft Boot/Protector

Drive Shaft Boot/Protector
Inspection
Visually inspect drive shaft protectors
and boots conditions.
Check protectors for damage or rub-
bing against shafts.
Check boots for cracks, tears, leaking
grease etc.
Repair or replace damaged parts as
necessary.
______________
102
FRONT OF VEHICLE
1. Drive shaft protector
2. Drive shaft boots
REAR OF VEHICLE
1. Drive shaft protector
2. Drive shaft boots