Honda CR-V Owner's Manual page 74

10/09/29 19:40:51 42SWAF30_074
ATTACHING CLIP
ANCHOR FITTING
On some child restraint types, route
the tether strap between the legs of
the head restraint as shown.
3. Attach the attaching clip to the
anchor fitting, making sure the
strap is not twisted.
4. Tighten the tether strap according
to the child restraint system
maker's instructions.
Installing a Child Restraint System
Using the Centre Anchor
ANCHOR FITTING
COVER
1. Push down the rear centre head
restraint to the lowest position.
2. After properly securing the child
restraint system (see page
open the anchor cover.
Driver and Passenger Safety
63 ),
CONTINUED
69