Honda CR-V Owner's Manual page 520

10/09/29 21:02:55 42SWAF30_520
Take the jack out of the spare tyre
5.
area.
Turn the jack's end bracket
anticlockwise to loosen it, then
remove the jack by lifting it
straight up.
6. Unscrew the wing bolt and take
the spare tyre out of its well.
7. Place blocks in front and back of
the wheel diagonally opposite the
tyre you are changing.
WHEEL NUT WRENCH
JACK
Loosen each wheel nut 1/2 turn
8.
with the wheel nut wrench.
Changing a Flat Tyre
JACKING POINT
Place the jack under the jacking
9.
point nearest the tyre you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
CONTINUED
Taking Care of the Unexpected
515