Honda CR-V Owner's Manual page 452

10/09/29 20:51:15 42SWAF30_452
RADIATOR CAP
Make sure the engine and radiator
1.
are cool.
2. Relieve any pressure in the cooling
system by turning the radiator cap
anticlockwise, without pressing
down.
3. Remove the radiator cap by
pushing down and turning
anticlockwise.
4. The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
Pour the coolant slowly and
carefully so you do not spill any.
Clean up any spills immediately; it
could damage components in the
engine compartment.
5. Put the radiator cap back on, and
tighten it fully.
Engine Coolant (Petrol models)
RESERVE TANK
2.4 engine model is shown.
6. Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.
Do not add any rust inhibitors or
other additives to your vehicle's
cooling system. They may not be
compatible with the coolant or
engine components.
Maintenance
447