Honda CR-V Owner's Manual page 472

10/09/29 20:54:45 42SWAF30_472
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.
6. Push the electrical connector onto
the new bulb. Make sure it is
connected securely.
7. Reinstall the cover over the back
of the headlight assembly and turn
it clockwise to lock it in place.
8. Turn on the headlights to test the
new bulb.
9. On the left side of diesel models
Reinstall the air intake duct
securely.
On the left side of petrol models
Reinstall the fuse box in place
securely.
High Beam Headlights
1. Open the bonnet.
2.4 engine model is shown.
On petrol models
To change a bulb on the left side,
remove the engine coolant reserve
tank by pulling it out of its holder.
Lights
On diesel models
To change a bulb on the right side,
remove the power steering fluid
tank from the stay.
CONTINUED
Maintenance
467