Honda CR-V Owner's Manual page 479

10/09/29 20:56:02 42SWAF30_479
Lights
5. Press the brake pedal to make
sure the new bulb is working.
6. Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
7. Put the cover back on the light
assembly. Push it in until it locks
in place.
474
Maintenance
Replacing a Rear Licence Plate
Light Bulb
LENS
Vehicle with navigation system is
shown.
1. Open the tailgate. Remove the
licence light assembly by pushing
the left edge of the lens toward
the right and pulling the assembly
out.
TAB
SOCKET
LENS
2. Remove the lens by pushing the
tabs.
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
BULB