10/09/29 20:43:44 42SWAF30_413
Deflation Warning System
After the initialisation is
4.
completed, you will see the above
display for a few seconds, then the
display goes back to the setting
display. At the same time, the
deflation warning system indicator
will go off.
408
Driving
If the initialisation is not
5.
successful, you will see the above
display for a few seconds, then the
display goes back to the setting
display. Repeat from step 3.
To exit the customizing mode,
6.
select the exit mode shown above
by pressing the INFO button
repeatedly, then press the SEL/
RESET button. The display goes
back to the normal display.
7.
After the initialisation, drive over
25 km/h (15 mph) for about 10
minutes.