Honda CR-V Owner's Manual page 264

10/09/29 20:15:55 42SWAF30_264
To Load a Disc
In-dash Disc Player
Insert a disc about halfway into the
disc slot. The drive will pull the disc
in the rest of the way and begin to
play it. The number of the track
playing is shown in the display. The
system will continuously play a disc
until you change modes.
You cannot load and play 8-cm
(3-inch) discs in this unit.
In-dash Disc Changer
Your vehicle's in-dash disc changer
holds up to six discs.
1. Press the LOAD button until you
hear a beep and see ''LOAD'' in
the display. To load only one disc,
press and release the LOAD
button. The green disc load
indicator will come on.
2. The disc number for an empty
position begins blinking.
3. Insert the disc into the disc slot
when the green disc load indicator
comes on. Insert it only about
halfway; the drive will pull it in the
rest of the way. You will see ''DISC
READ'' in the display while the
disc load indicator turns red and
blinks as the disc is loaded.
Playing a Disc
You cannot load and play 8-cm
(3-inch) discs in this unit.
4. When the disc load indicator turns
green and ''LOAD'' appears in the
display again, insert the next disc
in the slot. Do not try to insert a
disc until ''LOAD'' appears. You
could damage the audio unit.
5. Repeat this until all six positions
are loaded. If you are not loading
all six positions, the system begins
reading and playing the last disc
loaded.
You can also load a disc into an
empty position while a disc is playing
by pressing the appropriate side of
the preset button. The system stops
playing the current disc and starts
the loading sequence. It plays the
disc just loaded.
CONTINUED
Features
259