Honda CR-V Owner's Manual page 490

10/09/29 20:57:58 42SWAF30_490
Pull one end of the blade out from
3.
the holder.
Slide the blade out of the holder.
4. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
5. Slide the new blade into the holder.
Make sure it is engaged in the slot
along its full length.
Insert both ends of the blade into
the holder. Make sure they are
secure.
6. Install the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
7. Lower the wiper arm against the
windscreen.
Wiper Blades
485
Maintenance