Honda CR-V Owner's Manual page 241

10/09/29 20:11:11 42SWAF30_241
Climate Control System
Automatic Climate Control
To put the automatic climate control
in fully-automatic mode:
1. Press the AUTO button.
2. Set the desired temperature by
turning the driver's side
temperature control dial. You will
see AUTO and the selected
temperature in the display. You
can also set the passenger's side
temperature by turning the
passenger's side dial.
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature to your preference.
When you adjust a fan control, the
fan is taken out of AUTO mode.
236
Features
Temperature Control
The driver's side temperature and
the passenger's side temperature can
be set separately. Turn the dial of
the appropriate temperature control
clockwise to increase the
temperature of airflow. Turn the dial
anticlockwise to decrease it. Each set
temperature is shown in the display.
When you set the temperature to its
lower limit ( ) or its upper limit
( ), the system runs at full
cooling or heating only. It does not
regulate the interior temperature.
In cold weather, the fan will not
come on automatically until the
heater starts to develop warm air.
When the indicator in the dual
button is on, the driver's side and
passenger's side temperature can be
controlled independently (see page
240 ).
On Diesel models only
Your vehicle has the hot gas heater
system. It assists the heater to warm
the air (see page 242 ).
Dual Button
You can set the temperatures for the
driver's side and the passenger's side
separately when this button is
pressed (indicator is on). When the
indicator in the DUAL button is off,
the temperatures for both sides are
synchronized to the driver's side set
temperature. When defrost mode is
selected, dual mode operation is
cancelled.