Honda CR-V Owner's Manual page 120

10/09/29 19:49:51 42SWAF30_120
You can also select the specified
speed alarm while driving. If you set
the alarm to the specified vehicle
speed while driving, select ''SPEED
ALARM,'' and refer to page
If you want to change any vehicle
control settings, select ''CHG
SETTING,'' and follow the
instructions on page 122
If you want the settings as they were
when the vehicle left the factory,
select ''DEFAULT ALL,'' as
described on page 139
Use the INFO button (
steering wheel to see and scroll
through the settings, and the SEL/
RESET button to enter your
selections.
If you do not select any settings on
the display after you press the INFO
button and the setting menu is
displayed, the customizing mode
119 . display will return to the normal
display after about 10 seconds.
.
.
) on the
If you try to start driving while
customizing the settings, you will see
the above display for a few seconds
and customizing will be cancelled.
Multi-Information Display
Customizing is also cancelled, if you
turn the ignition switch out of the
ON (II) position to the ACCESSORY
(I) or LOCK (0) position, or release
the parking brake (M/T) or move
the shift lever out of Park (A/T).
If you select and press the
SEL/RESET button, the normal
display is shown again.
Instruments and Controls
115