Honda CR-V Owner's Manual page 33

10/09/29 19:33:23 42SWAF30_033
Additional Information About Your Seat Belts
The current display will be
interrupted and the rear seat belt
monitor will also be displayed on the
multi-information display if either
rear door is opened and closed, or
any of the rear passengers latches
their seat belt.
This monitor goes off after about 30
seconds. It will also go off when you
change the display by pressing the
INFO button ( ) on the steering
wheel.
28
Driver and Passenger Safety
The seat belt system detects any
seat belt use of all three rear seat
seating positions according to the
activation of each seat belt retractor.
Seat belts in right and centre
positions are used.
The system shows you how many
rear seat belts are being used and
reminds you and your passengers to
fasten their seat belts. According to
the rear seat belt use (1 through 3),
you will see the indicator(s)
highlighted on the multi-information
display.
The rear seat belt monitor
system judges the use of the
rear seat belt based on the
amount of seat belt pulled
out from the retractor. It is
not an indicator to show that
the rear seat belt is actually
latched. Correct latching of
the seat belts should be
confirmed whenever the
indicator shows a rear seat
belt is in use.
While driving, you can also confirm
the rear seat belt use. Press and
release the INFO button ( )
repeatedly to change the display.