Honda CR-V Owner's Manual page 177

10/09/29 19:59:45 42SWAF30_177
Door Locks
To programme the Park Unlock
mode:
Unlocks the driver's door or all doors
and tailgate when the shift lever is
moved to Park (P) position with the
brake pedal depressed (A/T vehicles
only).
1. Make sure the shift lever is in the
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
172
Instruments and Controls
3. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click.
Continue to hold down the switch:
Until you hear another click
(after about 5 seconds) to
activate driver's door unlock
feature.
Or, until you hear two more
clicks (after about 10 seconds)
to activate
all doors and tailgate
.
unlock feature
4. Release the switch, and within 20
seconds, turn the ignition switch
to the LOCK (0) position.
To programme the Ignition Switch
Unlock mode:
Unlocks the driver's door or all doors
and tailgate when the ignition switch is
moved out of the ON (II) position.
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.