Honda CR-V Owner's Manual page 477

10/09/29 20:55:43 42SWAF30_477
Lights
BULBS
4. Determine which bulb is burned
out: stop/tail-light, back-up light,
turn signal, tail-light, or rear fog
light on the driver's side only.
5. Remove the socket for that bulb
by turning it one-quarter turn
anticlockwise.
472
Maintenance
6.
Except for tail-light bulb
Remove the bulb from the socket
by pushing it in and turning the
bulb anticlockwise until it unlocks.
Tail-light bulb
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
7. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
8. Turn on the lights to make sure
the new bulb is working.
9. Align the clips on the tail-light
assembly with the holes in the
body, then push the tail-light
assembly into place. Tighten the
two mounting screws securely and
reinstall the covers.
Replacing a High-mount Brake
Light Bulb
COVER
1. Open the tailgate.
Unlatch the top of the cover by
pulling back on it with your hands.