Honda CR-V Owner's Manual page 270

10/09/29 20:17:05 42SWAF30_270
In-dash Disc Changer
DISC-SCAN This function
samples the first track of each disc
in the in-dash disc changer in the
order they are stored. To activate
disc scan, press the SCAN button
repeatedly until you see D-SCAN in
the display. The system will then
play the first track/file of the first
disc for approximately 10 seconds.
After playing the first track/file of
the last disc, the system plays
normally.
Each time you press and release the
SCAN button, the mode changes
from file scan, folder scan, disc scan,
then to normal play.
To Stop Playing a Disc
To play the radio when a disc is
playing, press the AM or FM button.
Press the CD/AUX button again to
switch back to the disc player or disc
changer.
To play an audio unit connected to
the auxiliary input jack when a disc is
playing, press the CD/AUX button.
Press the CD/AUX button again to
switch back to the disc player or disc
changer.
You can also press the MODE
button on the steering wheel to
change modes.
If you turn the system off while a
disc is playing, either with the
( ) button or by turning off the
ignition switch, the disc will stay in
the drive. When you turn the system
back on, the disc will begin playing
where it left off.
Playing a Disc
Removing a Disc from the Player
Press the eject button (
remove the disc. If you eject the disc,
but do not remove it from the slot,
the system will automatically reload
the disc after 10 seconds and put it in
pause mode. To begin playing, press
the CD/AUX button.
You can also eject the disc when the
ignition switch is off.
CONTINUED
Features
) to
265