Ip Gateway Menu; Port Gige Mac Address Menu - Motorola DSR-6050 Operator's Manual

3

IP Gateway Menu

Port GigE MAC Address Menu

36
Use the following procedure to set and view the Default Gateway address for the
lower Ethernet port on the back panel of the DSR-6050. Press the 56 buttons
until the IP Gateway menu appears. This menu allows the user to enter an IP
gateway address that the Ethernet port should use. The IP Gateway is an address
that is represented in the common dotted-decimal format. Contact the network
administrator for details about configuring the Ethernet port for operation on your
local network.
Press the4button until the cursor is at the Default Gateway address, and press the
ENTER button to move into the field. Use the arrow buttons (3456) to enter
the desired address and then press the ENTER button to confirm the selection.
Use the following procedure to view the GigE MAC address for the upper Ethernet port
on the back panel of the DSR-6050. Press the 56 buttons until the Port GigE menu
appears. The address is represented in a hexadecimal format and it is not editable.