Reset Menu
Press the 56 buttons until the Reset menu appears. This menu allows the user to
execute factory defaults or power cycle resets.
Reset Type Field
Press the 4 button until the cursor is at the Reset Type label, and press the ENTER
button to move into the field. Press the 56 buttons to display the options: No,
Factory Defaults, or Power Cycle.
Factory Defaults Option
The Factory Defaults option allows the user to reset the system to the programming
values originally set by the factory firmware.
Caution: Selecting this reset option deletes all defined setups and downloaded
information. This operation interrupts service output, so use it carefully.
Press the ENTER button. A warning message reminding you that all programming
will be lost if the action proceeds.
Press any arrow button ( 3456 ) to back out of the field and leave it unchanged.
Otherwise, press the ENTER button to proceed. The following message displays.
RESET
Reset Type
E
No
Default: No
CAUTION: IRD memory will be reset
Press E to continue or
to stop
Factory Default reset in progress. . .
Press E to continue or
to stop
25