Reset Data
To erase your settings and restore the HDT101's default settings:
1
Press
MENU
2
Highlight Installation and press
displayed.
3
Enter your four-digit password. If you have not yet created your own
password, enter the default password: 0000. The Installation menu is
displayed.
4
Highlight Reset Data and press
sure?" is displayed. This message is a reminder that your customer
settings will be replaced by the default settings.
5
Press the
on the remote control. The main menu is displayed.
key to highlight Yes and then press
. The Password window is
SELECT
. The message "Are you
SELECT
38
.
SELECT