Adjusting Position To Chart; Adjusting Video And Chart Using Trackball (R+P Mode) - JRC JMA-7710-6 Instruction Manual

8.5

8.5.7 Adjusting Position to Chart

Adjust the position on the video if it does not correspond to that on the chart in the R+P or plotter
(optional:NDB-33) mode.

8.5.7.1 Adjusting Video and Chart Using Trackball (R+P Mode)

1. Press the
Procedures
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
6. Move the cursor to the position to be adjusted using the trackball and
press the
7. Move the cursor to another position to be adjusted using the trackball
and press the
Perform positional adjustment. In this case, "Chart adjustment" will be displayed on
the upper right corner of the screen.
1. Follow procedures 1 to 4 above to select the "DELETE".
Cancellation
2. Press the
Position adjustment using the trackball is enabled only in the R+P mode.
Init set #3
INIT
SET #3
1. SHIFT COAST LINE #1
2. SHIFT COAST LINE #2
3. LAT LON CORRECTION
4. CHART CENTER POSITION
5. DATE
6.
SUB
key to open the SUB MENU.
MENU
9
key three times to open the INIT SET #3 menu.
1
key to select "SHIFT COAST LINE #1".
1
key to select the "SETTING".
ENT
key to set the system in the adjusting mode.
ENT
key.
ENT
key.
ENT
key.
SETTING DELETE
N 0.000'
E 0.000'
N 0.000'
E 0.000'
N 0˚ 00.000'
E 0˚ 00.000'
OFF UTC
8 – 49
0. PREV
9. NEXT
LOCAL