JRC JMA-7710-6 Instruction Manual page 150

3.7
3. Input the latitude of the destination by numeral keys and press the
key. (When not changed, press the
4. Input the longitude of the destination by numeral keys and press the
ENT
(Switching of North/Sough Longitude and East/West Latitude is effected
by the
5. Then the comment input screen appears. Select a character from the list
using the track ball and press the
6. To input the next character, repeat procedure 5.
(If the
character can be deleted. Further, for a space, press the
position where there is no letter.)
7. To input for a different destination number, repeat procedures 2 to 6.
To create a navigation line
1. Press the
Procedures
Procedures
select the color using the [COLOR] control.
2. Move the cursor to the start point of the navigation line and press
key. (Use the destination input on the destination input item for the start
point.)
3. Move the cursor to the next turning point and press the
4. Repeat procedure 3.
5. When the end point is reached, press the
key twice.
A navigation line will be drawn.
6. If the cursor is moved to the start point, a turning point, or the end point
and the
key. (When not changed, press the
key.)
CLR
key is pressed during operation, the immediately preceding
MARK
key to select the mark key on the screen and then
MENU
CLR
key is pressed, the line containing that point will be deleted.
3 – 91
ENT
key alone.)
ENT
key alone.)
ENT
key to fix it.
0 key and press the
ENT
ENT
key in a
9
0
key.
9