Adjusting Position To Chart; Adjusting Video And Chart Using Trackball (R+P Mode) - JRC JMA-3910-4 Instruction Manual

7.5

7.5.7 Adjusting Position to Chart

Adjust the position on the video if it does not correspond to that on the chart in the R+P or plotter (optional)
mode.

7.5.7.1 Adjusting Video and Chart Using Trackball (R+P Mode)

1. Press the
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
6. Move the cursor to the position to be adjusted using the trackball and
press the
7. Move the cursor to another position to be adjusted using the trackball
and press the
This enables position adjustment.
1. Follow procedures 1 to 4 above to select the "DELETE".
Cancellation
2. Press the
Position adjustment using the trackball is enabled only in the R+P mode.
INIT SETTING #3
INIT SETTING #3
Press an item number key.
0. PREVIOUS MENU
1. SHIFT COAST LINE #1
(RADAR PICTURE)
2. SHIFT COAST LINE #2
3. LAT ／ LON CORRECTION
4. CHART CENTER POSITION
5. DATA INPUT FORMAT
6. DATA ／ TIME
7. SHIP'S TYPE
8.
9. NEXT MENU
To close this menu, Press (SUB MENU) key.
SUB
key to open the SUB MENU.
MENU
9
key three times to open the INIT SETTING #3 menu.
1
key to select "SHIFT COAST LINE #1".
1
key to select the "SETTING".
ENT
key to set the system in the adjusting mode.
ENT
key.
ENT
key.
ENT
key.
SETTING DELETE
N 0.000'
E 0.000'
N 0.000'
E 0.000'
N 35˚00.000'
E 135˚00.000'
183 JRC
OFF UTC
FISHING BOAT
7 – 53
180
LOCAL
MERCHANT