Erasing An Unnecessary Target; Erasing A Target Per Target; Erasing All Targets - JRC JMA-7710-6 Instruction Manual

5.7

Erasing an Unnecessary Target

When the target on which the vector and symbol are displayed needs not to be tracked or when the number
of vectors is reduced from the screen to easily see the target, an unnecessary target can be erased one by one.
When acquition is resumed from the beginning for all target, all target can also be erased.

5.7.1 Erasing a Target per Target

1. Align the + cursor mark to the target to be erased.
Procedures
2. Press the
The target vector and symbol disappear and only the radar image remains.
Specifying and erasing a target number
1. Press the
Procedures
2. Press the
3. Press the
The vector and symbol of the specified target disappear and only the radar image
remains.

5.7.2 Erasing All Targets

Attention
When erasing all targets, the tracking of all the targets must be stopped and new automatic or manual
acquisition must be resumed. So use this function only when necessary.
Continue pressing the
Procedures
All vectors and symbols are erased.
TGT
key.
CNCL
TGT
key.
DATA
9
0
to keys to specify a target number.
TGT
key.
CNCL
TGT
key for two seconds or more.
CNCL
5 – 23