Vari Lite VL1000 ERS Luminaire User Manual page 81

Display Definition
Lamp
Lamp OFF Lamp is Off
Lamp ON Lamp is On
LampHour Lamp Hours
LampType Lamp Type
Lum Id Luminaire ID
Magenta Magenta
Manual Manual
Commands
Model
Movement Movement
No
OFF
OK
OK?
ON On Indefinitely
Pan
Pan/Tilt Pan/Tilt
PASS Test Pass
Power Lamp Power
PROG Programming
Re-Cal Recalibrate
ResetDef Reset Default
ResetHrs Reset Lamp Info
Rot Gobo Rotating Gobo
Rot Shut Rotating Shutter
RUN TEST Run-Test
Sensor Sensors
Setup
Shutter Shutter
Shutter? Shutter
Status Status/Error Dis-
STST Sensor Test
Test System Tests
Tilt
Version Version
Yes
Zoom Zoom Function
02. 96 63. 000 1 G
Purpose
Lamp
Configures arc luminaire so that lamp will not strike upon power up.
Configures arc luminaire so that lamp will strike upon power up.
Accesses menu item for configuring luminaire for arc or incandescent source.
Specifies manual control of Magenta (Manual) or test Magenta functions (Test).
Accesses functions for controlling luminaire mechanisms and timing by entry of
Model Displays model number of luminaire. For example, VL1000TS.
Enables and disables pan and tilt movement and auto-correction.
No Specifies that the luminaire does not contain the shutter accessory.
Off
Okay
Okay?
Sets Menu Display to stay on until programmed otherwise (Display) or turns on a
Pan Specifies pan function for manual control (Manual) or pan encoder for testing
Accesses pan and tilt options for DMX function, system configuration, and test-
Resets lamp hour and lamp strike counters. For use when new lamp is installed.
Specifies rotating gobo for manual control (Manual) or gobo select EOT sensor
Specifies shutter mechanism rotating function for manual control
Setup
Accesses menu item for configuring luminaire for shutter operation.
play
Tilt Specifies tilt function for manual control (Manual) or tilt encoder for testing
Displays current software version (Date and Time in two pages).
Yes
Specifies zoom function for manual control (Manual) or for testing (Test).
M
ENU
Accesses lamp power up options and information (Config).
Displays total number of lamp operating hours.
Displays unique luminaire ID number.
an absolute data value.
Turns off a function.
Calibration has completed and no errors have occurred.
Prompt for pressing [Enter] before an action is executed.
function.
Indicates that sensor test has passed.
Accesses function to turn lamp on or off.
Currently programming the new version of software.
Currently executing calibration or recalibrates luminaire.
Resets default system configuration values.
for testing (Test).
(Manual) or for testing (Test).
Indicates that a system mechanism test is in progress.
Accesses sensor choices for diagnostic testing.
Accesses lamp type and shutter operation settings.
Specifies shutter mechanism for testing.
Allows scrolling through error list or displays OK if no errors.
Indicates that a system sensor test is in progress.
Accesses diagnostic tests for internal mechanisms.
Specifies that the luminaire contains the shutter accessory.
05-Oct-2007
S : M F
YSTEM ENU UNCTIONS
(Test).
ing.
(Test).
4
63