Vari Lite VL1000 ERS Luminaire User Manual page 32

❋
VARI LITE® - VL1000™ ERS L
Incandescent Models (with On-Board Dimmer)
Some incandescent models of the VL1000 ERS luminaire contain an on-board dimmer. This dimmer is
used to power the lamp without need for an external dimmer. In these models, the lamp power cable is
not supplied and instead a blanking plug is installed at the power/data input panel (see illustration
above).
CAUTION: The on-board dimmer is not switchable. It is either 115V or 230V, depending on shipping
configuration.
Arc Models
An external ballast unit is included with the arc version of the VL1000 ERS luminaire. The lamp
power input cable is already connectorized for use with this unit.
Note: There is no provision for lengthening the cable. The ballast must be placed within 40 inches
(1m) of the luminaire. The Lamp Power Input Cable has conductors for lamp power and ballast
control. It is not compatible with VARI❋LITE Series 300 lamp runs.
14
U
UMINAIRE
Ballast Unit
Figure 2-3: Ballast Connection
' M
SER S ANUAL
Lamp Cable
40" (1m)
05-Oct-2007
VL1000 A/AI/AS
Model Luminaire
02. 96 63. 000 1 G