Menu Function Definitions - Vari Lite VL1000 ERS Luminaire User Manual

❋
VARI LITE® - VL1000™ ERS L

Menu Function Definitions

For easy reference, each possible menu item is listed alphabetically in the first column by its display
abbreviation. The second column follows with a definition of the abbreviation and then a third column
provides an explanation of its purpose and function.
Display Definition
10 Min 10 Minutes
30 Sec 30 Seconds
5 Min 5 Minutes
Address DMX Address
ALL All Motors
Amber
Arc
Blue
Cal ON Calibration On
Chan XXX DMX Channel
Clear
ColorMix Color Mixer
Config System
Configuration
Data DMX Data
Diffusn Diffusion
Dimmer Dimmer
Disable Disable
Display Display Illumina-
DMX
Edge Edge Function
Enable
Encoder Encoders
FAIL Test Fail
Fixt Hrs Fixture Hours
Fixture
Frame 1A - Frame Side
Frame 4B
GoboIndx Gobo Index
Incand Incandescent
Index Gobo Index
Inv Pan Invert Pan
Inv Tilt Invert Tilt
62
U
UMINAIRE
Purpose
Sets Menu Display to automatically shut off after 10 minutes of non-use.
Sets Menu Display to automatically shut off after 30 seconds of non-use.
Sets Menu Display to automatically shut off after 5 minutes of non-use.
Accesses function for setting luminaire DMX starting address.
Amber Specifies Amber for manual control (Manual) or test Amber functions (Test).
Arc
Blue Specifies Blue for manual control (Manual) or tests Blue functions (Test).
Configures arc luminaire so that lamp will strike after calibration procedure is
Clear
Accesses functions for setting lamp, pan/tilt, and Menu Display options. Also
accesses lamp information such as number of strikes, and hours used, along
Accesses function for displaying DMX data by channel number.
Specifies manual control of Diffusion (Manual) or tests Diffusion functions (Test).
Specifies dimmer mechanism for manual control (Manual) or tests dimmer/
tion
DMX
Specifies edge function for manual control (Manual) or for testing (Test).
Enable
Displays total number of hours luminaire has been powered on.
Fixture Access luminaire specification information such as model, serial number, soft-
Specifies shutter frames 1A, 1B, 2A, 2B, 3A, 3B, 4A or 4B for manual control
depending on which one is selected at the Manual Commands menu.
' M
SER S ANUAL
Tests all internal motors.
Specifies luminaire as having an arc lamp source.
complete.
Specifies DMX channel for display of current data value.
Clears stored parameters and re-calibrates luminaire.
Tests color mixing mechanism.
with their respective reset function.
strobe functions (Test).
Disables a function.
Accesses options for Menu Display on and off times.
Sets starting address for DMX systems.
Enables a function.
Accesses encoder choices for diagnostic testing.
Indicates that sensor test has failed.
ware version, along with status information.
Specifies gobo index EOT sensor for testing.
Specifies luminaire as having an incandescent lamp source.
Specifies rotating gobo index for manual control.
Reverses pan action for special focus requirements.
Reverses tilt action for special focus requirements.
05-Oct-2007 02. 96 63. 000 1 G