Step 3. At backcap, flip two bail clamps outward
Step 4. Flip two base clamps outward away from socket.
Step 5. Grip lamp by base and firmly install in socket.
Step 6. Close base and bail clamps, locking into place.
1
Socket
3
Step 7. Re-install backcap, ensuring that alignment studs and holes are aligned
Step 8. Align lamp. (Refer to
02. 96 63. 000 1 G
Flip bail clamps outward.
Bail Clamps
Close base clamps.
Figure 2-5: Installing Incandescent Lamp in Socket
"Align Lamp For Maximum Beam Irradiance" on page
I
: I
NSTALLATION
(Figure
2-5).
2
Flip base clamps outward.
Install lamp, firmly pressing into place.
Lamp
4
Close bail clamps.
05-Oct-2007
P
NSTALLATION
ROCEDURES
Do not touch lamp
CAUTION:
with bare fingers.
Base Clamps
(Figure
2
2-4).
31.)
19