Vari Lite VL1000 ERS Luminaire User Manual page 42

❋
VARI LITE® - VL1000™ ERS L
To hang luminaire in truss:
Step 1. Lift luminaire into mounting position.
Step 2. Secure in place with truss hooks. Ensure truss hook hardware that locks hook in place (e.g.
wing bolt) is properly tightened and that luminaire is fully supported.
Step 3. Attach safety cable (as required) as follows:
a. Connect end of cable to mounting pin at one side of pan tube base.
b. Loop at least once around pipe and attach other end at second mounting pin.
Step 4. Connect power and data cables according to procedure given in
Power" on page
Safety Cable:
Recommended for all
hanging installations.
May be required by
local codes.
(87.6cm)
24
U
UMINAIRE
27.
17.5"
(44.5cm)
34.5"
Figure 2-10: Example Luminaire Truss Hanging Installation
' M
SER S ANUAL
(66cm)
05-Oct-2007
"Connecting Data and
26.5"
(67.3cm)
26"
02. 96 63. 000 1 G