Table of Contents
Advertisement
Menu Default State
The menu display's default state during normal operation is to display the address. After 10 seconds of
inactivity at the display, it will change to this default state.
After 5 minutes of inactivity, the menu display will switch to its off state.
Menu Shortcuts
A few button combinations are provided as shortcuts for frequently used menu functions. These are as
follows:
•
Lamp On - Press and hold [Up], then press [Enter]. (Arc models only.)
•
Lamp Off - Press and hold [Down], then press [Enter]. (Arc models only.)
•
Recalibrate - Press and hold [Up], then press [Menu].
•
Interrupt Calibration - Press [Menu] at Power up. (See
Calibrating" on page 32
02. 96 63. 000 1 G
for more information.)
05-Oct-2007
M
S
: M
ENU
YSTEM
ENU
"Program Starting Address Without
4
O
PERATION
57
Advertisement
Table of Contents
Troubleshooting
