Can Bus Port Setup - Furuno NAVpilot-711C Installation Manual

Autopilot
Hide thumbs Also See for NAVpilot-711C:
Table of Contents

Advertisement

6) Set the ship's speed to the value set at [FOR SPEEDS UNDER].
7) Turn the helm, and then confirm that the safe helm and power assist feature acti-
vate correctly.
Note: Do not turn the helm rapidly. If the power assist feature works strongly, the
rudder can be turned more greatly than the turn as intended. [POWER ASSIST
RUDDER SPEED].
8) Turn the helm and adjust the response at [SAFEHELM RESPONSE].
9) When it is difficult to cruise at the speed set at step 6, adjust the setting value at
[FOR SPEEDS UNDER] so that you can control the vessel easily.
3.6

CAN bus Port Setup

The [CAN BUS SETUP] menu sets up the equipment connected to the CAN bus port.
1. The cursor is selecting [DEVICE LIST]; push the
knob.
This displays shows the name of the CAN bus
equipment connected to the CAN bus port. (In
the example illustration, the FURUNO Heading Sensor PG-700 is connected. The
series of alphanumerics which follow the model name are the CAN bus unique num-
ber.) The name of the device can be changed. If you do not need to change the name,
go to step 3.
2. To change the device name, do the following:
1) Push the knob.
2) Rotate the knob to select character then push the knob.
3) The cursor moves to the next character. Repeat step 2 to change the character.
You can select the input location with the
maximum of 14 characters.
3. Press the MENU key to go back to the [CAN BUS SETUP] menu.
4. Rotate the knob to select [INCOMING CAN BUS DATA] to show the following display.
This display shows all the NMEA 2000 sentences that the NAVpilot is capable of
receiving. The Parameter Group Number (PGN) the NAVpilot is currently receiving are
highlighted.
5. Press the MENU key to go back to the [CAN BUS SETUP] menu.
CAN BUS SETUP
DEVICE LIST
INCOMING CAN BUS DATA
SELECT OUTPUT PGN LIST
REFRESH: NO
INCOMING CAN BUS DATA
126464
059904
060928
126208
127258
126996
127250
127251
129025
127489
128259
128267
129284
129029
129033
129283
130306
130310
130311
130312
130314
130577
DEVICE LIST
PG-700:
0019E4
and
keys. The name can have a
126992
127488
129026
129285
130313
3. INITIAL SETTINGS
3-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Navpilot-711Navpilot-700Navpilot-720

Table of Contents