Initial Setup - Furuno TZtouchXL TZT22X Installation Manual

3.3

Initial Setup

This section shows you how to set your system according to the sensors you have
connected.
Note: Some units are set to metric in this section, actual setting ranges vary
depending on the unit of measurement set in the [Units] menu.
1. Tap the [FURUNO] icon to show the home screen and display mode settings.
2. Tap [Settings] to show the [Settings] menu.
3. Drag the main menu, then tap [Initial Setup] to show the [Initial Setup] menu.
4. Refer to the tables on the next several pages to set up the equipment.
[Boat Information] section
Menu item
[Boat Height]
[Boat Width]
[Boat Length]
[Boat MMSI]
[Boat Name]
[Size of Own Ship Icon] Set the size of own ship icon.
[Depth Display]
[External Transducer
Draft]
[Keel Draft]
[Engine Count]
[Instruments Setup] section
Menu item
[Engine &Tank Auto-
matic Setup]
[Engine &Tank Manual
Setup]
[Graphic Instruments
Setup]
[Manual Fuel Management] Section
Menu item
[Total Fuel Capacity]
[Manual Fuel Management]
Description
Set the height of your boat.
Set the width of your boat.
Set the length of your boat.
Set the MMSI for your boat (used for fleet tracking function).
Set the name for your boat (used for fleet tracking function).
Select the start point for depth measure-
ment.
Set the draft for external transducers
networked or multi-beam sonar.
For network transducers, set the draft
from the Home screen→[Set-
tings]→[Fish Finder]→[Fish Finder Intial
Setup]→[Transducer Draft].
For multi-beam sonars, set the draft
from the Home screen→[Set-
tings]→[DFF-3D Multibeam So-
nar]→[Initial Setup]→[External
Transducer Draft].
Set the keel draft.
Set the number of engines.
Description
See "[Engine & Tank Automatic Setup] section" on page 3-9.
See "[Engine & Tank Automatic Setup] section" on page 3-9.
See "[Graphic Instruments Setup] section" on page 3-8.
Description
Enter the total fuel capacity of your
tank(s).
Set to [ON] for manual fuel manage-
ment. See the Operator's Manual.
3. HOW TO SET UP THE EQUIPMENT
Options (setting range)
0 (m) to 999 (m)
0 (m) to 999 (m)
0 (m) to 999 (m)
50 to 150
[Under Keel],
[Under Sea Level]
0.0 (m) to 99.9 (m)
0.0 (m) to 99.9 (m
0 to 6
Options (setting range)
Options (setting range)
0 to 9,999(L).
[OFF], [ON].
3-5