2
IntelliTouch System Components
The main required components of an IntelliTouch system is a Load Center or Power Center,
IntelliTouch Personality Kit, and Interface:
Load or Power Center
•
Load Center: Provides a larger footprint (17" W x 23" H) Includes built-in sub panel (125 AMPS)
capable of holding up to eight 1" breakers. Also includes five 25 AMP three HP relays, 110/240 V
transformer with secondary side circuit protection. Multiple knockouts for different sizes of conduit
are supplied as well as a GFCI side knockout. The Load Center provides ample space for all high
and low voltage wiring needs.
•
Power Center: Offers a smaller footprint (17" W x 17" H) than the Load Center. The Power Center
does not include a circuit breaker base. Users should choose this enclosure if they already have
existing circuit breakers/sub-panel for their equipment.
•
Expansion Kits: Models i5X and i10X, offer five or ten additional Auxiliary Circuits for systems
i9+3, i9+3S and i10+3D. Each IntelliTouch Expansion Kit requires a Load Center (P/N 520136) or
Power Center (P/N 520137). Up to three Expansion Kits and Load or Power Centers may be
added to a system, for control of up to 38 Auxiliary Circuits (40 auxiliary circuits for i10+3D).
IntelliTouch Personality Kits
There are several types of IntelliTouch control systems available for different pool/spa configurations:
•
Shared Equipment: Pool and spa combinations with shared filtration system – Pool owners
can enjoy the convenience of motorized valves for water flow separation between pool and spa.
The Personality Kit models are:
•
i5+3 (P/N 520505) – Four auxiliary circuits plus filter pump operation (create a Feature
circuit for valve actuators without using an existing output auxiliary circuit, and special
light functions for color lighting). Five relays are included in the Load Center.
•
i7+3 (P/N 520507) – Six auxiliary circuits plus filter pump operation and the +3 option
(create a Feature circuit for valve actuators without using an existing output auxiliary
circuit, and special light functions for color lighting). Two relays are included in the kit
and five in the Load Center.
•
i9+3 (P/N 520509) – Eight auxiliary circuits plus filter pump operation and the +3 option
(create a Feature circuit for valve actuators without using an existing output auxiliary
circuit, and special light functions for color lighting). Four relays are included in the kit
and five in the Load Center.
•
Dual Equipment: Pool and Spa with Dual Sets of Equipment – The IntelliTouch i10+3D
(P/N 520510) is designed to operate two sets of pool equipment. Each set of a equipment (Pool or
Spa) can control one temperature setting. This IntelliTouch Personality Kit can control up to 10
pumps and/or lighting circuits, plus two heater circuits. The Personality Kit includes, eight auxiliary
circuits plus a filter pump.
The +3 option (create a Feature Macro circuit for valve actuators without using an existing output
auxiliary circuit). Five relays are included in the kit and five in the Load Center. You can create a
Feature circuit for valve actuators without using an existing output auxiliary circuit, and special
light functions for color lighting.
IntelliTouch Personality Kit Installation Guide