Intellitouch Pool and Spa Control System Installation Manual page 36

30
Setting up the MobileTouch Wireless Controller (Continued)
5. Press the button next to LOCK ON ADDRESS to access the next screen.
6. Press the button next to LOCK ON ADDRESS to assign a unique frequency for the MobileTouch
controller to avoid inference from other wireless devices within range of the MobileTouch
transceiver.
7. After selecting "Lock On Address" the MobileTouch controller is now ready to operate the
IntelliTouch system. The "Service Personnel" screen will be displayed.
8. Press Exit to return to the main screen or proceed with Step 9 if you are adding multiple
MobileTouch controllers while the IntelliTouch outdoor control panel LEDs are flashing.
9. To add another MobileTouch controller at this time, repeat Steps 4 through 8 for each
controller, if not, continue with Step 10.
10. Return the Load Center or Power Center. The System Control LEDs will be flashing. Press the
Reset button. When the "Auto" LED is illuminated the process is complete and the system is ready
for operation.
IntelliTouch Personality Kit Installation Guide