Table of Contents
Advertisement
Introduction
Welcome! Your Pentair IntelliTouch Pool and Spa and Control System will change the way you view pool
and spa controls. This innovation in pool and spa automation offers complete freedom for you while
having full automation control over your pool, spa, lights, heater, pump, cleaners and much more. You
can now schedule multiple start and stop times to control your lights, heater, spa jets, and filter pumps.
Using the IntelliTouch Indoor Control Panel or MobileTouch
pool, spa, and lights from anywhere inside or outside your home. Optional controllers are also available
such as the wireless Digital Tablet or Personal Digital Assistant (PDA), and in-wall Touch Screen that
can interface with your PC. IntelliTouch is a scalable system that can be upgraded to a completely
integrated home automation solution including audio, security, climate, irrigation and more. For more
information about using these interfaces, refer to the IntelliTouch ScreenLogic
on page 7.
IntelliTouch System Overview
An IntelliTouch system can include five (5) to 40 high voltage relays circuits that can be used to control
any combination of pumps, lights, water features. A maximum of ten (10) relays can be housed in an
IntelliTouch Load Center or Power Center. Up to three (3) Load Centers or Power Centers can be
connected to a main Load Center for a maximum of 40 relays. User-configurable circuits can be used to
control equipment. The "Feature Macro" circuits feature allows any number of circuits to be combined
and controlled by a single button.
An optional IntelliTouch Dimmer Module (P/N 520406) can be installed for use to dim any high voltage
incandescent light such as Pentair Amerlite
multiple lights from 100 watts up to 1,000 watts and installs in a standard relay location. Any number of
dimmers (up to 10 maximum) may be used with a maximum combined load of 4,000 watt in a single
Load Center.
In the home
The IntelliTouch system can utilize multiple wired and wireless controllers including the Digital Tablet,
Personal Digital Assistant (PDA), the wired in-wall Touch Screen, Indoor Control Panel, and the wireless
MobileTouch remote control panel. Your existing home PC can also be used to control the IntelliTouch
system via the ScreenLogic interfaces. A maximum of four (4) ScreenLogic interfaces can be used, for
example, four Tablets, or four PDA's, or four in-wall Touch Screen's, or four PC's in any combination.
Around the pool
Located near your spa, the IntelliTouch, iS10 or iS4 spa-side remote provide control buttons for various
pool and spa functions. The iS10 spa-side remote also provides a temperature display.
At the equipment pad
The pool pump, filter, and various IntelliTouch remote controllers and interfaces are connected to the
IntelliTouch Load Center and/or Power Center enclosure which are located at the equipment pad. The
Load Center enclosure is where the high voltage lines from the circuit breaker panel junction box at the
home are connected to. The pool service person can periodically check pool operations from the Load
Center.
Also at the equipment pad there are system pool and spa pipes connected to the pump, heater and
filtration system. Mounted on top the valves are motorized valve actuators used to automatically change
the direction flow of water through the plumbing system. There are also temperature sensors and a
cable that connects to the heater.
®
wireless control panel you can control your
®
®
and Pentair SpaBrite
IntelliTouch Personality Kit Installation Guide
®
Interface Accessory Kits
lights. The dimmer module supports
1
Hide quick links:
Advertisement
Table of Contents
