Load Center (With Built-In Sub-Panel) - Intellitouch Pool and Spa Control System Installation Manual

Load Center (with built-in Sub-panel)

The Load Center is installed at the equipment pad. The AC power for the Load Center is provided
from the Main-panel located at the house. For complete Power/Load Center installation
instructions, refer to the Load/Power center User's Guide (P/N 520100).
Note: Up to three additional Expansion Centers (i5x or i10x) can be added to a base
Power/Load Center: i9+3, i9+3S, i10+3D. For more information about using multiple
Power/Load Center, refer to the IntelliTouch Systems User's Guide (P/N 520102) and the
IntelliTouch Installation Guide (P/N 520101).
Low voltage
compartment
High voltage
cover panel
attachment
screw holes
Auxiliary,
2-Speed Pump
(1-3) or Dimmer
relay locations
Power relays
Front door
removal screw
Low voltage
raceway
Mounting
bracket
Enclosure mounting bracket
High voltage compartment
Load Center Enclosure
(23" H x 17" W x 4.8" D)
Low voltage
circuit breakers
Spring latch
System
transformer
Outdoor control
panel attachment
screw holes
Circuit breaker
base 125 AMP
(Sub-panel)
Spring latch
Grounding screw
terminals
GFCI knockout
(approved
rainproof cover
required)
IntelliTouch Personality Kit Installation Guide
15