Cabling The Indoor Control Panel - Intellitouch Pool and Spa Control System Installation Manual

24

Cabling the Indoor Control Panel

To connect the communication cable to the Indoor Control Panel:
1. Route the cable through the house wall to the location of the Indoor Control Panel. Pull a
working length of the communication cable out of the house wall.
2. Drill the flathead screw (provided) through the mounting sheave and into the wall.
3. Remove the control panel front cover: From the front of the control panel, insert the tip of
a small flat-blade screw driver into the notch on the top edge of the control panel cover and
gently pry the cover off from the control panel base.
Front cover
IntelliTouch Personality Kit Installation Guide
Sheave
Notch
Notch
Indoor Control Panel (front view)