Intellitouch In Your Home - Intellitouch Pool and Spa Control System Installation Manual

6
3
4
6
2
IntelliTouch in and around your home
Personal Computer (PC): Existing home owner's PC or Laptop. Connects to a wireless router
1
and the IntelliTouch Protocol adapter for control of IntelliTouch pool/spa systems. Requires a PC/
Laptop (Windows XP) with Ethernet/RJ45 adapter installed.
Personal Digital Assistant (PDA): This wireless PDA with a color touch screen enables you to
2
control your pool and spa features using the IntelliTouch ScreenLogic interface. The PDA is
custom configured for IntelliTouch systems.
In-wall Touch Screen: A color display with Ethernet (RJ45) connector. Connects to the provided
3
wireless router and Protocol adapter via Ethernet (RJ45) for control of IntelliTouch pool and spa
systems. The in-wall Touch Screen is custom configured for IntelliTouch systems.
Wireless Tablet: This control panel consists of a color touch screen. Receives and transmits
4
commands via wireless router and Protocol adapter for control of IntelliTouch pool/spa systems.
The Tablet is custom configured for IntelliTouch systems.
Indoor Control Panel: This control panel consists of a 3.75'' monochrome backlit LCD and
5
connects to the Personality Board in the Load Center or Power Center for control of IntelliTouch
pool and spa systems.
MobileTouch: This wireless control panel has a 3.75'' monochrome backlit LCD. Receives and
6
transmits commands via the Transceiver antenna located at the Load or Power Center.
Wireless router: Connects to the PC or Laptop via Ethernet connection to the Protocol adapter.
7
Protocol adapter: Connects to wireless router via Ethernet connection and to Personality board
8
(Load/Power Center) via a four-wire 22-AWG cable.
Load Center or Power Center. The main control center. Includes the Outdoor Control Panel that
9
controls pump, heater, and light relays. Receives commands via Protocol adapter, and wireless
and wired control panels connected to the Personality board.
MobileTouch Transceiver antenna: Connects to the Personality circuit board. Sends and
10
receives commands to and from the MobileTouch wireless control panel.
IntelliTouch Personality Kit Installation Guide
5
1
7
8
9
10