Using Phone Settings; Customizing Rings And Volume; Customizing The Phone Screen - Cisco 7961G Phone Manual

Using Phone Settings

You can customize your Cisco Unified IP Phone by adjusting the ring tone, background image, and
other settings.

Customizing Rings and Volume

You can customize the ring your phone uses to indicate an incoming call and adjust the ringer volume
for your phone.
If you want to...
Change the ring sound
Adjust the volume level
for the phone ringer

Customizing the Phone Screen

You can adjust some settings on your phone screen to fit your needs.
If you want to...
Change the phone
screen contrast
Change the
background image
Then...
1. Choose
2. Select a phone line.
3. Choose a ring tone to play a sample of it.
4. Press Select and Save to set the ring tone, or press Cancel.
(Press Default to apply the default ring setting to a highlighted
phone line.)
Note to set a line on your phone to flash only (no audible ringing),
you will need to place a request with the IMT Support Desk.
Press while the handset is in the cradle and the headset
and speakerphone buttons are off. The new ringer volume is saved
automatically.
Then...
1. Choose
2. To make adjustments, press Up, Down or
3. Press Save. Or press Cancel.
Note
If you accidentally save a very light or very dark contrast and cannot see
the phone screen display:
Press and then press 1, 3 on the keypad.
Next, press
screen display, and then press Save.
1. Choose
2. Scroll to view available images and press Select to choose an
image.
3. Press Preview to see a larger view of the background image.
4. Press Exit to return to the selection menu.
5. Press Save to accept the image or press Cancel.
18
> User Preferences > Rings.
> User Preferences > Contrast.
to change the contrast until you can see the phone
> User Preferences > Background Images.
.