Cisco 7961G Phone Manual page 9

Adjusting the Handset Rest
When you connect your phone, you might want to adjust the handset rest to ensure that the receiver
will not slip out of the cradle. See the table below for instructions.
1
Set the handset aside and pull the square plastic tab from the handset rest.
2
Rotate the tab 180 degrees.
Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab.
3
Return the handset to the handset rest.
Headset Information
To use a headset, connect it to the headset port on the back of your phone. For headset models that
are compatible with your phone and supported by IMT, please see this site:
www.apu.edu/imt/telecommunications/headsets. Requests to purchase headsets can be emailed to
the IMT Support Desk at support@apu.edu.
4