Certified Product Summary - Polycom BelAir50 Configuration Manual

Introduction

Certified Product Summary

Manufacturer:
Approved products:
RF technology:
Radio:
Security:
AP firmware version tested:
SpectraLink handset models tested:
SpectraLink handset software tested:
SpectraLink radio mode:
Maximum telephone calls per AP:
Recommended network topology:
Denotes products directly used in VIEW Certification testing
†
Only WPA-PSK and WPA2-PSK are used during VIEW Certification.
††
Other security methods, such as WEP, could be used as well.
PN: 1725-36065-001_D.doc
Polycom's Voice Interoperability for Enterprise Wireless (VIEW)
Certification Program is designed to ensure interoperability and high
performance between SpectraLink 8000 Wireless Telephones and
WLAN infrastructure products.
The products listed below have been thoroughly tested in Polycom's
lab using the VIEW Certification Test Plan. This document details
how to configure BelAir access points (APs) with SpectraLink 8000
Wireless Telephones.
BelAir Networks:
Wireless Controllers
N/A
802.11b/g
2.4 – 2.484 GHz
WPA-PSK and WPA2-PSK
5.0.1.1
e340/h340/i640
Switched Ethernet (recommended)
Release 5.0.1.1 must be used. Later releases do not include
changes to ensure SpectraLink interoperability.
BelAir Networks: BelAir50, BelAir100, BelAir200
www.belairnetworks.com
Access Points
BelAir50
BelAir100
BelAir200
††
89.127
802.11b
10
†
8020/8030
122.010 or greater
802.11b
10
3