Known Limitations; Service Information - Polycom BelAir50 Configuration Manual

Table of Contents

Advertisement

Known Limitations

Service Information

4
IMPORTANT NOTE: VIEW Certification testing verifies that the
user access radio of the BelAir AP 50/100/200 meets the VIEW
technical requirements for supporting SpectraLink 8000 Wireless
Telephones in a typical enterprise deployment. Testing is
conducted in a laboratory where neither outdoor AP coverage
area/range nor multiple mesh 'backhaul hops' are considered.
Because Wi-Fi mesh deployments vary significantly in terms of
wireless backhaul, actual performance can not be guaranteed in a
mesh environment.
In a BelAir mesh, only Point-to-Point backhaul links with few
"hops" are appropriate for voice traffic. Point-to-Multipoint or
Multipoint-to-Multipoint backhaul links cannot be used.
BelAir supports a variety of backhaul radio technologies. Only the
Wi-Fi backhaul radios were tested during VIEW Certification.
WMM must be disabled.
If you encounter difficulties or have questions regarding the
configuration process, please contact BelAir Networks technical
support at 1-877-235-2471,
https://support.belairnetworks.com/index.cfm.
techsupport@belairnetworks.com
PN: 1725-36065-001_D.doc
Configuration Guide
or

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BelAir50 and is the answer not in the manual?

This manual is also suitable for:

Belair100Belair200

Table of Contents