7.4.4
Activating the "Standby" operating state
In the "Standby" mode the pump, heater and chiller are switched off. The operating display remains
active.
Standby
3
Text
- - - °C
26.
סּ
Display
Menu
Main Menue
T
Setpoint Value
SET
Settings
Programmer
Interfaces
Graph
Clock
Standby
סּ
ESC
OK
48
27.10.2009
There are two ways of selecting the "Standby" mode:
10:57
−
Tset
1. Activate "Standby" by pressing
30.
00°C
Tint
45
−
2. Access to the main menu level is obtained by pressing
Standby
the enter key
−
Select "Standby" with
If "Standby" is active, it is highlighted in color in the soft-key
bar:
Standby
►
Note: By pressing the enter key
►
active operating state.
►
►
.
Standby
Operation
.
or
and confirm with
.
again your return to the
ECO GOLD
(right soft key).
.
25/08/2011/ YACE0088